Physical - HP 64746 User Manual

Electrical Characteristics of the HP 64700
The electrical characteristics of the HP 64700 communication ports are as follows.
Communications
Serial Port
BNC (labeled
TRIGGER IN/OUT)

Physical

Emulator Dimensions
Width
Height
Length
Emulator Weight
HP 64751
Cable Length
Emulator to
Communications
Serial Port
CMB Port
Possible damage to emulator. Any component used in suspending the emulator
CAUTION
must be rated for 30 kg (65 lb) capacity.
RS-232-C DCE or DTE to 38.4 Kbaud.
RS-422 DCE to 460.8 Kbaud.
Input. The signal must drive approximately 4 mA at 2 V. Edge
Sensitive. Minimum pulse width is approximately 25 ns.
Output. Driven active high only;
equals +2.4V into a 50 ohm load.
325 mm (12.8 in.)
173 mm (6.8 in.)
389 mm (15.3 in.)
8.2 kg (18 lb)
approximately 600 mm (2 ft).
target system
25-pin female type "D" subminiature connector.
9-pin female type "D" subminiature connector.
Chapter 14: Specifications and Characteristics
Emulator Specifications and Characteristics
533