To Change The Count Qualifier - HP 64746 User Manual

Chapter 7: Using the Emulation Analyzer
Qualifying Trigger and Store Conditions

To change the count qualifier

• Use the counting option in the trace command.
After initializing the analyzer, the default count qualifier is "time", which means
that the time between states is saved. When time is counted, up to 512 states can be
stored in the trace.
When you count states, the counter is incremented each time the state is captured
(not necessarily stored) by the analyzer. When a state is counted, up to 512 states
can be stored in the trace.
When you turn OFF counting, up to 1024 states can be stored in the trace.
262