HP 64746 User Manual page 561

Chapter 16: Installation
Step 1. Install Boards into the HP 64700 Card Cage
10 Install HP 64703A (or HP 64704/6) and HP 64746 boards. The HP 64703A (or HP 64704/6) is
installed in the slot next to the system controller board. The HP 64746 boards are installed in the bottom
two slots of the HP 64700 with the memory board above the board that has the emulator probe. These
boards are identified with labels that show the model number and the serial number.
To install a card, insert it into the plastic guides. Make sure the connectors are properly aligned; then,
press the card into mother board sockets. Check to ensure that the cards are seated all the way into the
sockets. If the cards can be removed with your fingers, the cards are NOT seated all the way into the
mother board socket.
561