Table of Contents
Advertisement
Chapter 16: Installation
Installing Hardware
This section describes how to install emulation and analysis hardware.
Equipment supplied
The minimum system contains:
•
•
•
Optional parts are:
•
•
Equipment and tools needed
In order to install and use the 68302 emulation system, you need:
•
•
•
Installation overview
The steps in the installation process are:
1
2
Your emulation and analysis system may already be assembled (depending on how
parts of the system were ordered).
552
HP 64700 Card Cage.
One of the following emulators:
– HP 64746A/G 68302 Emulator, 128 Kbytes emulation memory.
– HP 64746B/H 68302 Emulator, 512 Kbytes emulation memory.
– HP 64746J 68302 Emulator, uses the HP 64170 memory board which
can contain up to 4 Mbytes of emulation memory.
HP 64703A 64-Channel Emulation Bus Analyzer and 16-Channel External
State/Timing Analyzer.
HP 64704A 80-Channel Emulation Bus Analyzer (instead of HP 64703A).
HP 64706A 48-Channel Emulation Bus Analyzer (instead of HP 64703A).
Host computer or terminal with RS-232/RS-422 port.
RS-232/RS-422 cable.
Flat-blade screwdriver.
Install emulator and analyzer boards into the HP 64700 Card Cage.
Apply power to the HP 64700.
Advertisement
Table of Contents
