Connecting The Emulator Probe - HP 64746 User Manual

Connecting the Emulator Probe

The 68302 emulator probe plugs into a PGA through-hole socket that is soldered
into the target system.
This section describes the steps you must perform when connecting the emulator to
a target system:
1
2
3
Also, this section provides information about probing a target system designed for a
PQFP package microprocessor.
Possible Damage to the Emulator Probe. The emulator contains devices that are
CAUTION
susceptible to damage by static discharge. Therefore, precautionary measures
should be taken before handling the emulator probe to avoid damaging the internal
components of the emulator by static electricity.
Turn OFF power.
Plug the emulator probe into the target system.
Turn ON power.
Chapter 5: Plugging into a Target System
Connecting the Emulator Probe
143