Table of Contents
Advertisement
Step 1. Install Boards into the HP 64700 Card
Cage
WARNING
Before removing or installing parts in the HP 64700 Card Cage, make sure
that the card cage power is off and that the power cord is disconnected.
CAUTION
Do NOT stand the HP 64700 on the rear panel. You could damage the rear panel
ports and connectors.
If your emulator and analyzer boards are already installed in the HP 64700 Card Cage, go to "Step 2.
Connect the HP 64700 to a Host Computer or Terminal".
Step 1. Install Boards into the HP 64700 Card Cage
Chapter 16: Installation
553
Advertisement
Table of Contents
