Table of Contents
Advertisement
Chapter 16: Installation
Step 2. Start the interface with the emul700 command
Graphical User Interface. Otherwise, emul700 starts the conventional Softkey
Interface.
You should include an ampersand ("&") with the command to start the Graphical
User Interface as a background process. Doing so frees the terminal window where
you started the interface so that the window may still be used.
5 Optionally start additional Graphical User Interface windows into the same
emulation session by repeating the previous step.
You can also choose to use the conventional Softkey Interface under X Windows,
but you must include a command line argument to emul700 to override the default
Graphical User Interface. Start the conventional interface by entering
emul700 -u skemul <logical name>
Example
Suppose you have discovered that the logical name for a 68302 emulator connected
to the LAN is "em68302". To start the Graphical User Interface and begin
communicating with that emulator, enter (assuming your $PATH includes
$HP64000/bin)
emul700 em68302
After a few seconds, the Graphical User Interface Emulator/Analyzer window
should appear on your screen. The window will be similar to the following:
584
Advertisement
Table of Contents
