HP 64746 User Manual page 495

Chapter 13: Error Messages
Graphical/Softkey Interface Messages - Unnumbered
Perfinit - error in input file line <NUMBER>
Cause: You included an input file name with your
"performance_measurement_initialize" command, and that file contains a syntax
error.
Action: Edit the file and correct the syntax error.
Perfinit <—-EXPR—- ERROR> line <LINE NUMBER>
Perfinit - File could not be opened
Cause: You specified a file as an option to "performance_measurement_initialize",
and the file you specified could not be found or opened by SPMT software.
Action: Make sure you entered the correct file name.
Perfinit - No events in file
Cause: You specified a file along with your "performance_measurement"initialize"
command that contained no events. Any measurement displayed from this file will
have NULL results.
Action: Either edit the file to add events, or use the default setup to start a new
measurement.
perf.out file could not be opened - created
Cause: The performance analyzer failed to open or create a file named "perf.out" in
response to your "performance_measurement_end" command.
Action: Free up some file space or correct the write permissions in your current
working directory.
Performance tool must be initialized
Cause: You tried to make a performance measurement when the Software
Performance Measurement Tool (SPMT) was not initialized.
Action: The Software Performance Measurement Tool (SPMT) must be initialized
before making performance measurements on your software. Use the
performance_measurement_initialize command to initialize the SPMT.
495