Table of Contents
Advertisement
Chapter 12: Emulator/Analyzer Interface Commands
RANGE
pberr
A value of 0 qualifies the state as /BERR active.
pbio
The value following this softkey is searched for on the lines that monitor processor
signals PB11 through PB8.
rom
A value of 0 qualifies the state as a write to ROM.
extra
Combines the edma, pbclr, cs, pberr, grd, rom, pbio, and ipl softkeys. Some
values you can specify following the extra softkey are:
Examples
See the trace command examples.
See Also
The trace command and the QUALIFIER syntax description.
444
Advertisement
Table of Contents
