Omron M1 Series User Manual page 510

7 Other Functions
Pa-
rame-
Item No.
ter
No.
5_54 W161
5_62 M59
5_63 W179
7-1-4
Alarm information
Item Parameter
No. No.
1 Latest alarm
6_00 X20
6_01 X21
6_02 X22
6_03 X23
6_04 X24
6_05 X25
7-18
Item
Braking Resistor
0.0 to 100.0%
Thermal Monitor
Motor Electronic
0.0 to 100.0%
Thermal Monitor
Total RUN Time Mon-
0 to 655350 hours
itor
Item
Latest Alarm Info. 0.00 to 99.99,
Output Frequency 100.0 to 590.0 [Hz]
Latest Alarm Info. 0.00 to 99.99,
Output Current 100.0 to 655.3 [A]
Latest Alarm Info.
0 to 999 [V]
Output Voltage
Latest Alarm Info. Tor-
-400 to 400 [%]
que Monitor
Latest Alarm Info. 0.00 to 99.99,
Frequency Command 100.0 to 590.0 [Hz]
Latest Alarm Info.
F/r/----
Running Status 1
Range
The percentage of the electronic thermal cal-
culated value for motor protection at the cur-
rent moment is displayed. If the percentage
reaches 100.0%, the dBH alarm occurs.
The percentage of the electronic thermal cal-
culated value for motor protection at the cur-
rent moment is displayed. If the percentage
reaches 100.0%, the OL1 (1st motor over-
load) or OL2 (2nd motor overload) (depend-
ing on whether the 1st control or 2nd control
is selected) occurs.
The cumulative time of the inverter RUN state
is displayed.
Measurement range: 0 to 655,350 hours
Display: The cumulative operation time is dis-
played alternately in the upper digits and low-
er digits.
Example 0 <=> 535h (535 hours)
655 <=> 350h (655,350 hours)
When the lower three digits are displayed, an
h (hours) is displayed in the lowermost digit.
If 655,350 hours is reached, the display re-
mains as 655350.
Range
The output frequency before slip com-
pensation is displayed in increments of
0.01 Hz. A value of 100.0 Hz or higher is
displayed in increments of 0.1 Hz.
The output current is displayed. A cur-
rent value of 100.0A or higher is dis-
played in increments of 0.1 A.
Display unit: A (Ampere)
The output voltage is displayed.
Display unit: V (Volt)
The torque calculated value is displayed.
The set frequency is displayed.
The output operation direction is dis-
played.
M1 Series Standard Type User's Manual (I669)
Display item
Description