Omron M1 Series User Manual page 154

3 Operation and Test Run
The following figure shows transition through "Operation monitor."
Program
Mode
 I/O check
When menu No. 4 "I/O check:
played on the LED monitor without the need to use a measuring instrument. External signals that
can be displayed are digital I/O signals and analog I/O signals.
For details on "I/O check" display items, refer to 7-1-2 I/O check on page 7-11.
The following figure shows transition through "I/O check."
3-10
Monitor item list Operation information data
" is used, the I/O signal status of external signals can be dis-
Output frequency 1
Output frequency 2
Recovery (follow-up) side
Z-phase pulse rate
M1 Series Standard Type User's Manual (I669)