Battery Box And Absolute Encoder Cable; Battery Specifications - Delta ASDA-B3 Series User Manual

ASDA-B3

10.1 Battery box and absolute encoder cable

10.1.1 Battery specifications

Precautions
Carefully read the following safety precautions. Use batteries only in accordance with the
specifications to avoid damage or dangerous conditions.
 Make sure the installation location is free of vapor and corrosive and
inflammable gas.
 Correctly place the battery into the battery box to avoid short-circuiting.
 Do not short-circuit the positive and negative electrodes of the battery, and do
not install the batteries in reverse direction.
 Do not mix new and used batteries to avoid losing power or shortening the life
of the new batteries. Replacing all batteries with new ones is recommended.
 Follow the instructions when installing and wiring the battery box to avoid
dangerous conditions.
 Do not place the battery in a high-temperature environment over 100°C
(212°F), as this may cause a fire or an explosion.
 The batteries are non-rechargeable. Do not charge the batteries as this may
result in an explosion.
 Do not directly weld on the surface of the battery.
Battery specifications
Item
Type
Delta model number
International standard size
Standard voltage
Standard capacity
Maximum continuous
discharge current
Maximum pulse current
Dimensions (D x H)
Weight
Operating temperature
Supplier
Part number for the battery
with wires
Li/SOCl2 Cylindrical Battery
ER14505
ASD-CLBT0100
AA
3.6V
2700 mAh
100 mA
200 mA
14.5 x 50.5 mm
Approx. 19 g
-40°C to +85°C (-40°F to +185°F)
EVE Energy Co., Ltd
0991023281
Absolute System
10
10-3