Wiring
3.3.1.3 Communication type models – CN1 wiring diagrams
For the analog speed command and the analog torque (thrust) command of the -E, -F, and -M
3
models, the valid voltage is between -10V and +10V. You can set the command value that
corresponds to the voltage range with the relevant parameters.
C1: input for analog speed / torque (thrust) command
C2: output for analog monitoring command (MON1 and MON2)
3-52
Controller
10 kΩ
10V
10V
-E / -F / -M servo drive
8 kΩ
Max. output:
±8V, 1 mA
MON1 21
(MON2 22)
10
GND
-E / -F / -M servo drive
1.2 kΩ
19 V-REF
(20 T-REF)
Approx. 12 kΩ
10
Controller
8 kΩ
10V
full-scale
SG
ASDA-B3