Description Of The Drive Interface; L Models - Delta ASDA-B3 Series User Manual

Product Overview

1.4 Description of the drive interface

1.4.1 -L models

1
No.
(1)
(2)
(3)
(4)
Regenerative
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
1-14
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Name
- 7-segment display.
CHARGE Power indicator.
Main circuit power input terminal.
RST 220V models: connects to commercial power supply (200 - 230 V
400V models: connects to commercial power supply (380 - 400 V
Control circuit power input terminal.
L , L 220V models: connects to single-phase power supply (200 - 230 V
1C 2C
400V models: connects to single-phase power supply (380 - 400 V
Connects to an external regenerative resistor, external power regenerative unit,
resistor or the built-in regenerative resistor.
Servo drive current output: connects to the motor power connector (U, V, W). Do
UVW not connect to the main circuit power. Incorrect wiring will cause damage to the
servo drive.
Grounding
Connects to the ground wires for the power and servo motor.
screws
CN4 Mini USB connector: connects to PC.
CN3 Modbus communication port.
CN1 I/O signal interface: connects to PLC or controls I/O.
CN10 STO connector: only supported by the B3A series.
CN2 Encoder connector: connects to the encoder.
C
N
4
V
W
Description
(8)
(9)
(10)
(11)
(12)
, 50/60 Hz);
AC
, 50/60 Hz).
AC
, 50/60 Hz);
AC
, 50/60 Hz).
AC
ASDA-B3