Encoder Cable Specifications - Delta ASDA-B3 Series User Manual

ASDA-B3

3.1.6.2 Encoder cable specifications

Item
Model number
Cable type
DC+5V, GND
T+, T-
Cable diameter
Max. allowable
wiring length
Standard length
provided by
Delta
Note:
Use a shielded twisted-pair cable to reduce the noise interference.
1.
The shield should connect to the ground terminal
2.
When wiring, use the wires suggested in this section to avoid danger.
3.
Standard cable
ACS3-CAEN01XX
ACS3-CAEA01XX
ACS3-CAEN11XX
ACS3-CAEA11XX
ACS3-CAENA1XX
ACS3-CAEAA1XX
ACS3-CRENA1XX
ACS3-CREAA1XX
UL2464 (Temp. rating: 80°C / 221°F)
AWG#22-2C (0.33 mm²)
Outer diameter of insulated wire: Φ1.3 mm
AWG#24-2P (0.2 mm²)
Outer diameter of insulated wire: Φ1.1 mm
Φ7 mm
ACS3-CAEF01XX
ACS3-CAEB01XX
ACS3-CAEF11XX
ACS3-CAEB11XX
ACS3-CAEFA1XX
ACS3-CAEBA1XX
ACS3-CREFA1XX
ACS3-CREBA1XX
UL2464 (Temp. rating: 80°C / 221°F)
AWG#22-2C (0.33 mm²)
Outer diameter of insulated wire: Φ1.3 mm
AWG#24-2P (0.2 mm²)
Outer diameter of insulated wire: Φ1.1 mm
20 m
L = 3 m, 5 m, 10 m, 20 m
.
Flexible cable
Φ7 mm
Wiring
3
3-33