Switching Commands - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

This chapter describes the switching commands available in the managed switch CLI.
The Switching Commands chapter includes the following sections:
• "Port Configuration Commands" on page 3-2
• "show port description" on page 3-9
• "VLAN Commands" on page 3-30
• "Double VLAN Commands" on page 3-45
• "Voice VLAN Commands" on page 3-47
• "Provisioning (IEEE 802.1p) Commands" on page 3-50
• "Protected Ports Commands" on page 3-51
• "Private Group Commands" on page 3-53
• "GVRP Commands" on page 3-58
• "GMRP Commands" on page 3-60
• "Port-Based Network Access Control Commands" on page 3-63
• "Storm-Control Commands" on page 3-77
• "Port-Channel/LAG (802.3ad) Commands" on page 3-89
• "Port Mirroring" on page 3-112
• "Static MAC Filtering" on page 3-114
• "DHCP Snooping Configuration Commands" on page 3-119
• "Dynamic ARP Inspection Commands" on page 3-130
• "IGMP Snooping Configuration Commands" on page 3-138
• "IGMP Snooping Querier Commands" on page 3-147
• "Port Security Commands" on page 3-153
• "LLDP (802.1AB) Commands" on page 3-157

Switching Commands

v1.0, July 2009
Chapter 3
3-1