Configure A Diffserv Class - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
7. Select the administrative mode for DiffServ:
• Enable. Differentiated services are active. This is the default setting.
• Disable. The DiffServ configuration is retained and can be changed but is not active.
8. Click the Apply button.
Your settings are saved.
The following table describes the information displayed in the Status table on the DiffServ
Configuration page.
Table 55. DiffServ Status information
Field
Class Table
Class Rule table
Policy table
Policy Instance Table
Policy Attributes Table
Service Table

Configure a DiffServ class

You can add a new DiffServ class name, or rename or delete an existing class. You can also
define the criteria to associate with a DiffServ class. As packets are received, these DiffServ
classes are used to prioritize packets. You can set up multiple match criteria in a class. The
logic is a Boolean logical AND for this criteria. After creating a class, click the class link to the
Class page.
Configure Quality of Service
Cloud Management
Description
The number of configured DiffServ classes out of the total allowed on the switch.
The number of configured class rules out of the total allowed on the switch.
The number of configured policies out of the total allowed on the switch.
The number of configured policy class instances out of the total allowed on the
switch.
The number of configured policy attributes (attached to the policy class instances)
out of the total allowed on the switch.
The number of configured services (attached to the policies on specified interfaces)
out of the total allowed on the switch.
273 User Manual