Perform A Speed Test; Connect Your Cable Modem Router To A Router After Installation And Activation - NETGEAR DOCSIS C6230 User Manual

To activate your Internet service:
1. Visit your cable Internet provider's website and follow the onscreen instructions to
activate your Internet service.
2. If you are unable to activate your Internet service using the instructions on your cable
Internet provider's website, call your cable Internet provider for support.
3. To determine the accurate Internet speed, visit your cable Internet provider's speed
test website and perform a speed test.
If your actual speed is lower than your subscribed speed, contact your cable Internet
provider.

Perform a Speed Test

To determine the accurate Internet speed, visit the speed test website of your cable
Internet provider and perform a speed test.
If your actual speed is lower than your subscribed speed, contact your cable Internet
provider.
Connect Your Cable Modem Router to a
Router After Installation and Activation
During the installation and activation, you must connect the cable modem router directly
to a computer. After installation and activation, you can connect the cable modem router
to a router.
If you want to connect your cable modem router to a router, you must disable router
mode on the cable modem router. Disable router mode so that your cable modem
router avoids conflicting with the other router on the network.
To disable router mode on your cable modem router:
1. Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2. Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
Hardware Setup
C6230 WiFi Cable Modem Router
17 User Manual