Connecting The Model Rp614 V2 Web Safe Router - NETGEAR RP614 - Web Safe Router Reference Manual

Reference Manual for the Model RP614 v2 Web Safe Router

Connecting the Model RP614 v2 Web Safe Router

This section provides instructions for connecting the RP614 v2 router. Also, the Model RP614 v2
Resource CD included with your router contains an animated Installation Assistant to help you
through this procedure.
Procedure: Connecting the Router
There are three steps to connecting your router:
Connect the router to your network
1.
Log in to the router
2.
Connect to the Internet
3.
Follow the steps below to connect your router to your network. You can also refer to the Resource
CD included with your router which contains an animated Installation Assistant to help you
through this procedure.
1. Connect the router to your network.
Turn off your computer and Cable or DSL Modem.
a.
Disconnect the Ethernet cable (A) from your computer which connects to your cable or
b.
DSL modem.
A
Figure 2-1: Disconnect the cable or DSL Modem
2-4
Cable or DSL modem
Connecting the Router to the Internet