Index - NETGEAR RH348 Reference Manual

A
A/B Adapter 2 field, ISDN Setup menu, 3-9
A/B Adapter field, ISDN Setup menu, 3-9
accounting function, 9-4
Action Matched/Not Matched field
Generic Filter Rule menu, 8-8
TCP/IP Filter Rule menu, 8-6
Active field
Edit Dial-in User, 6-5
Edit IP Static Route menu, 7-5
Generic Filter Rule menu, 8-7
Remote Node Profile menu, 5-2
Syslog and Accounting menu, 9-5
TCP/IP Filter Rule menu, 8-5
Address Resolution Protocol, 1-14
Analog Call field, ISDN Setup menu, 3-7
Analog Call Routing field, ISDN Setup
menu, 3-10
analog voice ports, 1-3
B
B Channel Usage field, ISDN Setup menu, 3-7,
3-9
Bandwidth Allocation Control Protocol, 5-6
Bandwidth on Demand, 5-6
Base Transmission Rate, 5-6
blacklist function, 9-10
budget management, 9-10
C
cables, 2-7
call control, 9-10

Index

Call Direction field, Remote Node Profile
menu, 5-2
Callback Budget Management field, Default
Dial-in Setup, 6-3
Callback field, Edit Dial-in User, 6-5
callback function, 1-5
calling line identification, 1-4
CHAP authentication, 1-5, 5-2, 6-2
coaxial cable, 2-8
command interpreter mode, 9-9
command-line mode, 9-6
compression, 1-2
Compression field, Remote Node PPP Options
menu, 5-5
configuration
automatic by DHCP, 1-4
backup, 9-8
restoring, 9-8
connecting
cables, 2-7
devices, 2-8
power, 3-2
router, 2-4
serial port, 2-9
through Telnet session, 2-9
conventions, xvi
Country Code field, System Maintenance menu,
9-3
customer support, iii
Index
1