Manager Password Setup - NETGEAR RP114 Reference Manual

Table 7-5. Menu 3.2 - TCP/IP and DHCP Setup Fields (continued)
Field
RIP Version
Multicast

Manager Password Setup

For security, you should change the Manager password from the default value of 1234.
To change the Manager password:
Select option 23, System Password, from the main menu.
1.
Menu 23 - System Password opens
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
Figure 7-5. Menu 23 - System Password
Using the Manager Interface for Initial Router Configuration
Reference Guide for the Model RP114 Web Safe Router
Description
This field determines the format and broadcasting method of any RIP
(Routing Information Protocol) transmissions by the router. The following
RIP options are supported by the Model RP114 router:
• RIP-1—The router sends RIP-1 messages only.
• RIP-2B—The router sends RIP-2 messages in broadcast format.
• RIP-2M—The router sends RIP-2 messages in multicast format.
For most applications, the recommended version is RIP-1.
Some streaming media applications (e.g. Cisco IP/TV, RealPlayer) now
support IP Multicast. To enable Multicast routing, select either IGMP-v1
or IGMP-v2.
(Figure 7-5).
Menu 23 - System Password
7-11