Set Up A Syslog Server - NETGEAR Orbi Pro SXS80 User Manual

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
5. To manage the actions that the router logs, check or clear the check boxes for the
following actions:
• Attempted access to allowed sites: Selected by default.
• Attempted access to blocked sites and services: Selected by default.
• Connections to the Web-based interface of this Router: Selected by default.
• Router operation (startup, get time etc): Selected by default.
• Known DoS attacks and Port Scans: Selected by default.
• Port Forwarding / Port Triggering: Selected by default.
• Wireless access: Selected by default.
• VPN Service: Selected by default.
• Insight: Cleared by default.
6. To refresh the log page, click the Refresh button.
7. To clear the log entries, click the Clear Log button.
8. To email the log immediately, click the Send Log button.

Set up a syslog server

If a syslog server is present on your network, you can configure the router to send its
system logs to the syslog server.
To enable the syslog function and specify the syslog server:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 28.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Advanced > Administration > Logs.
The Logs page displays.
Manage and Monitor Your Orbi
Pro System
151 User Manual