Figure 7-2. Menu 21.1 - Filter Rules Summary; Table 7-1. Abbreviations Used In Menu 21.1 - Filter Rules Summary - NETGEAR RT311 Reference Manual

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
When you have finished filling in the Edit Comments field, press [Enter] at the Press
3.
ENTER to Confirm... prompt to confirm your selections, or press [Esc] at any time to
cancel your selections.
The new information is displayed in the read-only section of Menu 21 - Filter Set
Configuration.
Press [Enter] to display Menu 21.1 - Filter Rules Summary
4.
# A Type
- - ---- --------------------------------------------------------------- - - -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137
2 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138
3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139
4 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137
5 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138
6 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139
Enter Filter Rule Number (1-6) to Configure:
Figure 7-2. Menu 21.1 - Filter Rules Summary
The information in this menu is read-only; the parameters of each rule that you configured for that
set are displayed.
Table 7-1 lists and describes the abbreviations used in Menu 21.1 - Filter Rules Summary.
Table 7-1. Abbreviations Used in Menu 21.1 - Filter Rules Summary
Abbreviation Description
# Refers to the filter rule number (1–6).
A Refers to Active. Y means the filter rule is active, and N means the filter rule is
inactive.
Type Refers to the type of filter rule and can display GEN for generic or IP for TCP/IP.
Filter Rules The filter rule parameters are displayed here.
M Refers to More. Y means there are more rules to check. N means there are no rules to
check.
Configuring Filters
Menu 21.3 - Filter Rules Summary
Filter Rules
(Figure 7-2).
M m n
N D N
N D N
N D N
N D N
N D N
N D F
7-3