Removing The Pc Card; Replacing The Pc Card Adapter Flash Disk; Figure 47: Removing The Pc Card; Figure 48: Inserting The Pc Card Flash Disk - Juniper M7I Hardware Manual

Copyright © 2010, Juniper Networks, Inc.

Removing the PC Card

The PC card is inserted in the slot labeled
remove the PC card (see Figure 47 on page 105):
Press the eject button located to the right of the PC card slot in the Routing Engine
1.
faceplate.
When the PC card pops partially out of the slot, grasp the card and pull it straight out
2.
of the slot.

Figure 47: Removing the PC Card

Replacing the PC Card Adapter Flash Disk

The PC card is an adapter that holds a flash disk. To replace the flash disk (see Figure
48 on page 105):
If a flash disk is already inserted in the PC card adapter, slide the flash disk out of the
1.
adapter.
Align the replacement flash disk with the adapter.
2.
Press the flash disk firmly all the way into the adapter.
3.

Figure 48: Inserting the PC Card Flash Disk

Chapter 15: Replacing M7i Hardware Components
in the Routing Engine faceplate. To
PC CARD
105