Configuration Example - Siemens Pointek CLS200 Operating Instructions Manual
Hide thumbs
Also See for Pointek CLS200:
- Quick start manual (200 pages) ,
- Operating instructions manual (129 pages) ,
- Instruction manual (114 pages)
Table of Contents
Advertisement
Remote operation
9.2 Status
9.2.2
Configuration example
To configure and use PROFIBUS PA with an S7-300/400 PLC
1. If Pointek CLS200/300 is not listed in the STEP 7 device catalog, you can download the
DeviceInstall file from the Siemens Milltronics website and run it from your computer. Go to
CLS200 web page
instrumentation/level-measurement/point-level/pointek-cls200.html) and click Downloads.
2. Add the Pointek CLS200/300 "rack": click and drag the Pointek CLS200/300 folder from the
hardware catalog.
3. Fill the rack with desired modules, by dragging and dropping them from the hardware
catalog.
4. After configuring PROFIBUS PA in steps 2 and 3, download it to the PLC.
Add code to the PLC program to read data consistently using the SFC14.
70
(https://new.siemens.com/global/en/products/automation/process-
Pointek CLS200/CLS300 digital
Operating Instructions, 05/2021, A5E47904060-AA
Advertisement
Table of Contents
