Mounting - Siemens Pointek CLS200 Operating Instructions Manual

5.1.3.2

Mounting

Pointek CLS200 (compact threaded probe shown)
High level alarm
① Normal process level
② Vertical
③ Normal process level
④ Horizontal
For high level alarm (level exceeds normal process level):
• normally mounted into the vessel top, or
• mounted through the tank wall at the detection level
For low level alarm (level drops below normal process level):
• mounted through the tank wall at the detection level
Pointek CLS200 typical configuration with extensions:
High level alarm
① Normal process level
For high or low level alarm:
• designed for top mounting. The probe suspends vertically so that it reaches into the
process at the desired detection level (high or low detection alarm).
Pointek CLS200/CLS300 digital
Operating Instructions, 05/2021, A5E47904060-AA
Low level alarm
Low level alarm
Installation
5.1 Pointek CLS200
17