Suzuki Grand Vitara 2011 Manual page 913

4) Remove rear wheel hub assembly referring to "Rear
Wheel Hub Assembly Removal and Installation".
5) Remove control rod referring to "Control Rod
Removal and Installation".
6) Remove trailing rod referring to "Trailing Rod
Removal and Installation".
7) Remove lower arm referring to "Lower Arm Removal
and Installation".
8) Remove rear drive shaft referring to "Rear Drive
Shaft Assembly Removal and Installation: Rear in
Section 3A".
9) Remove rear suspension knuckle referring to "Rear
Suspension Knuckle Removal and Installation".
10) Remove upper arm referring to "Upper Arm Removal
and Installation".
11) Remove parking cable clamp bolt (1) and parking
cable clamp (2).
2
12) Remove rear wheel speed sensor clamp bolt (1) and
speed sensor harness clamp (2) (if equipped).
13) Disconnect rear height sensor connector (3) and
rear height sensor harness clamp (4) (if equipped)
for left side.
4
3
1
I5JB0A230047-01
2
1
4
4
I5JB0A230048-01
14) Support rear suspension frame with rear differential
by using mission jack (1).
15) Remove rear suspension frame mount bolts (1) and
washer (2) and then lower mission jack and remove
rear suspension frame (3) with rear differential and
rear suspension frame stopper (4).
2
1
16) Dismounting rear differential from rear suspension
frame referring to "Rear Differential Unit
Components: Rear in Section 3B".
17) Remove rear suspension frame stiffener and
dynamic damper from rear suspension frame, if
necessary.
Rear Suspension: 2C-20
1
I5JB0A230049-01
2
3
1
I5JB0A230050-03