1I-14 Starting System: For Diesel Engine Model
No-Load Performance Test
1) Connect battery and ammeter to starter as shown.
2) Check that starter rotates smoothly and steadily with
pinion moving out. Check that ammeter indicates
specified current.
Specified current (no-load performance test)
90A MAX. at 11V
NOTE
Use wires as thick as possible and tighten
each terminal fully.
Starting Motor Components
11
2
1. Front housing
2. Yoke
Repair Instructions
12
5
5. Planetary carrier shaft assembly
6. Plunger / lever assembly
8
7
9
(a)
13
15
9. Pin
10. Magnetic switch inner bolt
A
6
14
1
13. Over-running clutch
14. Pinion stop ring
I5JB0B190005-01
S6JB0A1926005
I5JB0B190006-02