Suzuki Grand Vitara 2011 Manual page 786

1G-43 Fuel System: For Diesel Engine Model
b) Install special tool to injection pump front bracket
(1) in order to fit injection pump pulley (2).
Special tool
(A): 09912–96530
c) Tighten injection pulley nut to specified torque.
Tightening torque
Injection pump pulley nut (a): 70 N·m (7.0
kgf-m, 51.0 lb-ft)
d) Remove special tool (A).
4) Install injection pump (1) with injection pump front
bracket (2) and timing belt cover plate (3) to cylinder
block.
5) Tighten new injection pump front bracket bolts as
follows.
a) Tighten injection pump front bracket bolts to 20
N⋅m (2.0 kgf-m, 14.5 lb-ft).
b) Retighten them by turning through 80°.
Tightening torque
Injection pump front bracket bolt (a):
Tighten 20 N⋅m (0.2 kgf-m, 14.5 lb-ft) and 80°
by the specified procedure.
2
(a)
6) Install injection pump rear bracket (1).
Tightening torque
Injection pump rear bracket to cylinder block
bolt (a): 44 N·m (4.4 kgf-m, 32.0 lb-ft)
Injection pump rear bracket to injection pump
bolt (Type 2) (b): 44 N·m (4.4 kgf-m, 32.0 lb-ft)
Injection pump rear bracket to injection pump
bolt M8 (Type 3) (c): 30 N·m (3.0 kgf-m, 22.0 lb-ft)
Injection pump rear bracket to injection pump
bolt M6 (Type 3) (d): 10 N·m (1.0 kgf-m, 7.5 lb-ft)
I5JB0B170026-02
3
1
I5JB0B170027-01
[A]: Type 2 [B]: Type 3
I6JB0A172010-01