Front Wheel Encoder Removal and Installation
CAUTION
!
Front wheel encoder is included in front
wheel hub assembly. If front wheel encoder
needs to replaced, replace it as a front wheel
hub assembly.
For removal and installation of front wheel hub
assembly, referring to "Front Wheel Hub Assembly
Removal and Installation in Section 2B".
Rear Wheel Encoder On-Vehicle Inspection
Before inspect rear wheel encoder, remove rear drive
shaft referring to "Rear Drive Shaft Disassembly and
Assembly: Rear in Section 3A".
• Check encoder (1) for being crack, damaged or
deformed.
• Turn wheel and check if encoder rotation is free from
eccentricity and looseness.
• Check that no foreign material is attached.
If any faulty is found, repair or replace. Refer to "Rear
Wheel Hub Assembly Removal and Installation in
Section 2C".
Rear Wheel Encoder Removal and Installation
S6JB0A4506011
CAUTION
!
Rear wheel encoder is included in rear wheel
hub assembly. If rear wheel encoder needs to
replaced, replace it as a rear wheel hub
assembly.
For removal and installation of front wheel hub
assembly, referring to "Rear Wheel Hub Assembly
Removal and Installation in Section 2C".
S6JB0A4506012
1
I5JB0A450035-01
ABS:
4E-43
S6JB0A4506013