Front Wheel Hub Assembly And Steering Knuckle Components; Front Wheel Hub Assembly Removal And Installation - Suzuki Grand Vitara 2011 Manual

2B-8 Front Suspension:
• Inspect bearing for wear, abnormal noise or gripping.
If defective, replace.
• Inspect coil spring seat for cracks or deformation.
If defective, replace.

Front Wheel Hub Assembly and Steering Knuckle Components

CAUTION
!
Never disassemble front wheel hub assembly. Disassembly will spoil its original function. If faulty
condition is found, replace it with new one.
3
(a)
[A]: 2WD model
1. Front wheel hub assembly
2. Steering knuckle
3. Drive shaft nut
: Calk, after tightening.
Front Wheel Hub Assembly Removal and
Installation
CAUTION
!
Never disassemble front wheel hub
assembly. Disassembly will spoil its original
function. If faulty condition is found, replace
it with new one.
1
4. Dust cover
5. Wheel hub housing bolt
6. front wheel spindle
: 220 N⋅m (22.0 kgf-m, 159.5 lb-ft)
S6JB0A2206007
• Inspect bump stopper for deterioration.
If defective, replace.
• Inspect rebound stopper and strut mount for wear,
cracks or deformation.
If defective, replace.
2
4
Removal
1) Hoist vehicle and remove wheel.
2) Uncaulk drive shaft nut (1).
3) Depress foot brake pedal and hold it. Remove drive
haft nut (1).
4) Remove front wheel spindle (if equipped).
S6JB0A2206006
5 (b)
[A]
6
I6JB01220002-02
: 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
: Do not reuse.
I5JB0A220013-01