Suzuki Grand Vitara 2011 Manual page 957

Special tool
(A): 09900–20607
(B): 09926–78311
(D): 09951–16070
(F): 09926–78311–002
: 09922–76520
(A)
(B)
(D)
(F)
13) Obtain adjusting shim thickness by the following
equation.
Mounting
Necessary
dummy size
shim
= 103.0 mm/
thickness
4.0551 in. "a"
"e"
+ "b"
14) Select adjusting shim(s) (2) closest to calculated
value from among the following available sizes and
put it in place and then press-fit rear bearing (1).
Special tool
(G): 09913–85210
(H): 09940–53111
Available shim thickness
1.00, 1.03, 1.06, 1.09, 1.12, 1.15, 1.18, 1.21,1.24,
1.27, 1.30 and 0.3 mm
(0.039, 0.040, 0.042, 0.043, 0.044, 0.045, 0.046,
0.047 0.048, 0.049, 0.050 and 0.012 in.)
3. Drive bevel pinion
I5JB0A321032-01
Drive bevel
pinion
Measured
mounting
+ dimension –
distance
"c"
102 mm/
4.0157 in.
I5JB0A321033-01
15) With new pinion spacer (3) inserted as shown in the
figure, install front bearing (5) to differential carrier
(4).
NOTE
• Make sure to use new spacer for
reinstallation.
• Apply differential oil to bearings.
1. Drive bevel pinion
2. Rear bearing
16) Using special tool and plastic hammer, drive oil seal
(2) into differential carrier (1) as shown in figure.
Then apply grease "A" to oil seal lip.
"A": Grease 99000–25010 (SUZUKI Super
Grease A)
Special tool
(A): 09951–18210
Differential: Front 3B-12
I5JB0A321034-01
I5JB0A321035-01