Rear Differential Assembly Disassembly And Reassembly - Suzuki Grand Vitara 2011 Manual

3B-25 Differential: Rear
Rear Differential Assembly Disassembly and
Reassembly
Disassembly
1) Drive out rear drive right and left shaft using special
tools.
Special tool
(A): 09942–15511
(B): 09943–17912
(B)
(A)
2) Remove rear drive right and left retainers.
3) Tapping rear cover flanges with plastic hammer,
remove rear cover (1) and dynamic damper (if
equipped).
1
4) Disassembly rear drive right retainer as follows, if
necessary.
a) Remove oil seal (1) using special tool.
Special tool
(A): 09913–50121
S6JB0A3226005
I5JB0A322007-01
I5JB0A322008-01
(A)
1
I5JB0A322009-01
b) Remove snap ring.
c) Drive out rear drive shaft bearing using special
tools.
Special tool
(A): 09930–30104
(B): 09941–64511
(B)
5) Disassembly rear drive left retainer in the same
manner at Step 4), if necessary.
6) Take out differential assembly (1), outer race and
shim all at once.
I5JB0A322010-01
(A)
I5JB0A322011-01
1
I5JB0A321012-02