Suzuki Grand Vitara 2011 Manual page 594

1D-104 Engine Mechanical: For J20 Engine
6) Install valve to valve guide.
Before installing valve to valve guide, apply engine
oil to stem seal, valve guide bore, and valve stem.
7) Install valve spring and spring retainer.
Each valve spring has top end (large-pitch end (1))
and bottom end (small-pitch end (2)). Be sure to
position spring in place with its bottom end (small-
pitch end) facing the bottom (valve spring seat side).
A: Valve spring retainer side
I2RH01140130-01
I2RH0B140100-01
B: Valve spring seat side
8) Using special tool (Valve lifter), compress valve
spring and fit two valve cotters (1) into groove in
valve stem.
Special tool
(A): 09916–14510
(B): 09916–16510
(C): 09919–28610
(D): 09916–84511
9) Install intake manifold referring to "Intake Manifold
Removal and Installation: For J20 Engine".
10) Install exhaust manifold referring to "Exhaust
Manifold Removal and Installation (For J20 Engine
Model): For Petrol Engine Model in Section 1K".
11) Install injectors referring to "Fuel Injector Removal
and Installation: For Petrol Engine Model in Section
1G".
I2RH01140132-01