1D-164 Engine Mechanical: For F9Q Engine
Turbocharger Assembly Adjustment
1) Loosen lock nut (1).
2) Tighten or loose adjusting wheel (2) so as to adjust
stroke of boost presser control valve rod with
applying specified pressure.
For correct stroke and specified pressure, refer to
"Boost Presser Control Valve" under "Turbocharger
Assembly Inspection: For F9Q Engine".
3) Tighten lock nut after adjusting.
Intake Manifold and Exhaust Manifold Components
(b)
1. Intake manifold
2. Exhaust manifold
3. Intake and exhaust manifold gasket
S6JB0A1436070
4
(a)
3. Intake and exhaust manifold gasket
4. Exhaust manifold heat shield
: Tighten 28 N⋅m (2.8 kgf-m, 20.5 lb-ft) by the specified
procedure.
2
1
I5JB0B140140-01
S6JB0A1436058
3
I5JB0B140057-01
: 11 N⋅m (1.1 kgf-m, 8.0 lb-ft)
: Do not reuse.