4F-10 Electronic Stability Program:
4. SLIP indicator light
5. ESP® OFF light
6. Steering angle sensor
Electronic Stability Program Check
Refer to the following items for the details of each step.
Step
1
Malfunction analysis
1) Perform "Customer complaint analysis: ".
2) Perform "Problem symptom confirmation: ".
3) Perform "DTC check, record and clearance: " and
recheck DTC.
Is there any malfunction DTC?
2
Driving test
1) Perform "Step 2: Driving Test: ".
Is trouble symptom identified?
3
DTC check
1) Perform "DTC Check".
Is it malfunction code?
4
ESP® check
1) Inspect and repair referring to applicable DTC flow.
Does trouble recur?
5
Brakes diagnosis
1) Inspect and repair referring to "Brakes Symptom
Diagnosis in Section 4A".
Does trouble recur?
6
Intermittent problem check
1) Check intermittent troubles referring to "Intermittent and
Poor Connection Inspection in Section 00" and related
circuit of trouble code recorded in Step 1.
Does trouble recur?
7
Final confirmation test
1) Perform "Step 7: Final Confirmation Test: ".
Does trouble recur?
10. ESP® hydraulic unit / control module assembly
11. Front wheel speed sensor
12. Front wheel encoder
Diagnostic Information and Procedures
Action
16. Stop light switch
Yes
Go to Step 4.
Go to Step 3.
Go to Step 4.
Go to Step 5.
Go to Step 3.
Go to Step 4.
Go to Step 3.
S6JB0A4604001
No
Go to Step 2.
Go to Step 6.
Go to Step 5.
Go to Step 7.
Go to Step 7.
Go to Step 7.
End.