Visual Inspection; Dtc Check - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:
Table of Contents

Advertisement

Visual Inspection

Check the following parts and systems visually.
Inspection Item
• Front differential oil ---- level, leakage
• Rear differential oil ---- level, leakage
• Transfer gear oil ---- level, leakage
• Manual transmission oil ---- level, leakage
• Transfer mounting(s) ---- wear and looseness
• Fuses ---- burning
• Battery ---- fluid level, corrosion of terminal
• Connectors of electric wire harness ---- disconnection,
friction
• Other parts that can be checked visually

DTC Check

Using SUZUKI Scan Tool
1) Turn ignition switch to OFF position.
2) Connect SUZUKI scan tool to data link connector
(DLC) (1) located on underside of instrument panel.
Special tool
(A): SUZUKI scan tool
(A)
Transfer: Motor-Shift Type (Transfer with Shift Actuator) 3C-20
"Front Differential Oil Change: Front in Section 3B"
"Rear Differential Oil Change: Rear in Section 3B"
"Transfer Oil Change: Motor-Shift Type (Transfer with
Shift Actuator)"
"Manual Transmission Oil Change: For Petrol Engine
Model in Section 5B" or "Manual Transmission Oil
Change: For Diesel Engine Model in Section 5B"
"Battery Inspection: For Petrol Engine Model in Section
1J" or "Battery Inspection: For Diesel Engine Model in
Section 1J"
"Intermittent and Poor Connection Inspection in Section
00"
3) Turn ignition switch to ON position.
S6JB0A3314005
4) Read DTC according to instructions displayed on
SUZUKI scan tool and print it or write it down. Refer
to SUZUKI scan tool operator's manual for further
details.
If communication between SUZUKI scan tool and
4WD control module is not possible, check if
SUZUKI scan tool is communicable by connecting it
to 4WD control module in another vehicle. If
communication is possible in this case, SUZUKI
scan tool is in good condition. Then check data link
connector and serial data line (circuit) in the vehicle
with which communication was not possible.
5) After completing the check, turn ignition switch OFF
and disconnect SUZUKI scan tool from data link
connector (DLC).
1
I5JB0A332012-01
S6JB0A3314004
Referring

Advertisement

Table of Contents
loading

Table of Contents