Accessory Drive Belt Inspection; Accessory Drive Belt Tensioner Removal And Installation; Specifications; Charging System Specifications - Suzuki Grand Vitara 2011 Manual

Accessory Drive Belt Inspection

Check accessory drive belt for cracks, cuts, deformation,
wear and cleanliness, and replace as required.
Accessory Drive Belt Tensioner Removal and
Installation
Removal
1) Remove accessory drive belt referring to "Accessory
Drive Belt and Idler Pulley Removal and Installation:
For Diesel Engine Model".
2) Remove accessory drive belt tensioner.

Charging System Specifications

Battery
Battery
: 95D26L (63AH/5HR) 12 V
Battery type
Rated capacity
Electrolyte
Electrolyte S.G.
Generator
Type
Rated voltage
Nominal output
Permissible max. speed
No-load speed
Regulated voltage
Exposed brush length
Permissible ambient temperature
Polarity
Rotation
S6JB0A1A26007
S6JB0A1A26008

Specifications

AH/5HR, 12 Volts
L (US / lmp pt.)
Charging System: For Diesel Engine Model 1J-29
Installation
1) Install accessory drive belt tensioner.
2) Tighten accessory drive belt tensioner bolt No.1 and
No.2 to specified torque.
Tightening torque
Accessory drive belt tensioner bolt No.2 (a): 22
N·m (2.2 kgf-m, 16.0 lb-ft)
Accessory drive belt tensioner bolt No.1 (b): 50
N·m (5.5 kgf-m, 36.5 lb-ft)
3) Install accessory drive belt referring to "Accessory
Drive Belt and Idler Pulley Removal and Installation:
For Diesel Engine Model".
63
4.0 (8.45 / 7.04)
1.28 when fully charged at 20 °C (68 °F)
150 A type
12 V
150 A
18,000 r/min.
1500 r/min. (rpm)
14.2 – 14.8 V
Standard: 10.5 mm (0.41 in.)
Limit: 4.5 mm (0.18 in.)
–30 – 90 °C (–22 to 194 °F)
Negative ground
Clockwise viewed from pulley side
(a)
(b)
I5JB0B1A0029-01
S6JB0A1A27001
95D26L