Suzuki Grand Vitara 2011 Manual page 643

17) Support front suspension frame and engine rear
mounting member using engine jack (2).
18) Carry out Step 1) through 12) of "Removal" under
"Front Suspension Frame, Stabilizer Bar and/or
Bushings Removal and Installation in Section 2B" in
order to lower engine with front suspension frame.
19) Remove front suspension frame mounting bolts (1).
1
20) Remove engine rear mounting member bolts (1).
1
4
21) Before lowering engine with transmission and front
22) Lower engine with transmission and front
23) Disconnect transmission from engine referring to
2
I5JB0A141017-02
I5JB0A141018-02
Engine Mechanical: For F9Q Engine 1D-153
2
3
5
6
suspension frame from engine compartment,
recheck to make sure all hoses, electric wires and
cables are disconnected.
suspension frame from engine compartment.
CAUTION
!
Before lowering engine, in order to avoid
damage to A/C compressor, make clearance
by rising them.
"Manual Transmission Assembly Dismounting and
Remounting: For Diesel Engine Model in Section
5B", if necessary.
I5JB0B140043-01