Specifications; Tightening Torque Specifications - Suzuki Grand Vitara 2011 Manual

1B-10 Aux. Emission Control Devices: For Diesel Engine Model
Exhaust Gas Temperature Sensor 1, 2 and 3
Inspection
NOTE
Exhaust gas temperature sensor 2 and 3 are
equipped with only vehicle with diesel
particulate filter.
1) Disconnect negative (–) cable at battery.
2) Disconnect exhaust gas temperature sensor 1, 2
and/or 3 connectors.
3) Measure resistance between terminals of exhaust
gas temperature sensor 1, 2 and/or 3 connectors.
If resistance is out of specification, replace exhaust
gas temperature sensor 1, 2 and/or 3.
Exhaust gas temperature sensor resistance
Exhaust gas temperature sensor 1
1.77 kΩ at 400 °C, 752 °F
0.7 kΩ at 500 °C, 932 °F
Exhaust gas temperature sensor 2
106 kΩ at 50 °C, 122 °F
33.5 kΩ at 100 °C, 212 °F
Exhaust gas temperature sensor 3
132 kΩ at 250 °C, 482 °F
3.5 kΩ at 500 °C, 932 °F

Tightening Torque Specifications

Fastening part
Exhaust gas temperature sensor 1
Exhaust gas temperature sensor 2
Exhaust gas temperature sensor 3
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information in Section 0A".
Differential Pressure Sensor Removal and
Installation (with Diesel Particulate Filter)
S6JB0A1226008
Removal
1) Disconnect negative (–) cable at battery.
2) Detach diesel particulate filter differential pressure
sensor (1) from its bracket.
3) Disconnect diesel particulate filter differential
pressure sensor connector (1) and hoses (2) from
diesel particulate filter differential pressure sensor
(3).
Installation
Reverse removal procedure of installation.
I5JB0B120014-01

Specifications

Tightening torque
N⋅m kgf-m
40
30
30
1
3
lb-ft
4.0 29.0
3.0 22.0
3.0 22.0
S6JB0A1226009
I5JB0B120015-01
1
2
I5JB0B120016-01
S6JB0A1227001
Note