Suzuki Grand Vitara 2011 Manual page 548

1D-58 Engine Mechanical: For M16A Engine with VVT
2) Next, check bearing cap bore diameter without
bearing. On mating surface of cylinder block, five
alphabets are stamped as shown in the figure.
Three kinds of alphabets ("A", "B" and "C") or
numbers ("1", "2" and "3") represent the following
cap bore diameters.
Stamped alphabets or numbers on cylinder block
represent bearing cap bore diameter marked with an
arrow in the figure respectively.
For example, stamped "A" or "1" indicates that
corresponding bearing cap bore diameter is 56.0000
– 56.0060 mm (2.2048 – 2.2049 in.).
Crankshaft bearing cap bore
Stamped
Bearing cap bore diameter (without
alphabet
(number)
56.0000 – 56.0060 mm
A (1)
(2.2048 – 2.2049 in.)
56.0061 – 56.0120 mm
B (2)
(2.2050 – 2.2051 in.)
56.0121 – 56.0180 mm
C (3)
(2.2052 – 2.2054 in.)
bearing)
I2RH0B140143-02
3) There are 5 kinds of standard bearings differing in
thickness. To distinguish them, they are painted in
the following colors at the position as indicated in the
figure.
Each color indicated the following thickness at the
center of bearing.
Standard size of crankshaft main bearing
thickness
Color
Bearing thickness
painted
Purple 1.992 – 1.996 mm (0.07843 – 0.07858 in.)
Brown 1.995 – 1.999 mm (0.07855 – 0.07870 in.)
Green 1.998 – 2.002 mm (0.07867 – 0.07882 in.)
Black 2.001 – 2.005 mm (0.07878 – 0.07893 in.)
Colorless
2.004 – 2.008 mm (0.07890 – 0.07906 in.)
(no paint)
1. Paint
4) From number stamped on crank web No.2 and
alphabets stamped on cylinder block, determine new
standard bearing to be installed to journal, by
referring to the table shown.
For example, if number stamped on crank web No.2
is "1" and alphabet stamped on cylinder block is "B",
install a new standard bearing painted in "Brown" to
its journal.
New standard size crankshaft main bearing
specification
web No.2 (Journal diameter)
Alphabet A (1) Purple
stamped on B (2) Brown
cylinder block
C (3)
(Cap bore dia.)
I2RH01140191-01
Number stamped on crank
1 2 3
Brown Green
Green Black
Green Black Colorless
New standard bearing to be
installed