Manual Transmission/Transaxle; For Petrol Engine Model; General Description; Manual Transmission Construction - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:
Table of Contents

Advertisement

5B-1 Manual Transmission/Transaxle: For Petrol Engine Model

Manual Transmission/Transaxle

Transmission / Transaxle

For Petrol Engine Model

Manual Transmission Construction

The manual transmission consists of the input shaft, output shaft, countershaft and reverse idle gear shaft which are
installed in the die-cast aluminum alloy case. This transmission provides five forward speeds and one reverse speed.
The 1st, 2nd, 3rd and 4th speeds are for speed reduction drive, 5th speed is for direct drive. The low speed (1st and
2nd) synchronizer is mounted on the countershaft and engaged with the countershaft 1st or 2nd gear. The high speed
(3rd and 4th) synchronizer is mounted on of the input shaft and engaged with the input shaft 3rd and 4th gear. The 5th
speed synchronizer is mounted on the input shaft and engaged with the output shaft. The gear shift lever case is
located at the upper behind the transmission case and has a cam which prevents direct gear shifting from the 5th
speed gear into the reverse gear.
As the die-cast aluminum alloy case are sealed with liquid type gasket, it is necessary to use genuine sealant or its
equivalent on its mating surface when reassembling them. Also, the case fastening bolts must be tightened to
specified torque by means of the torque wrench and tightening over or below the specified torque should be avoided.
The description under "Repair Instructions" covers the transfer (or extension case) partially which is next to the
transmission as well, but their gear boxes are independent and each of them has its own drain and filler plugs for the
oil change or the level check.
1. Input shaft
2. Transmission front case
3. Reverse idler gear
4. Reverse shaft
5. 4th gear
6. High speed synchronizer hub

General Description

1
2
3
18
17
7. 3rd gear
8. Gear shift shaft
9. Output shaft gear
10. Adapter case
11. Output shaft
12. 5th speed synchronizer hub
4
5
6
7
13
12
14
16
15
8
10
9
11
13. Countershaft
14. 2nd gear
15. Transmission rear case
16. Low speed synchronizer hub
17. 1st gear
18. Reverse gear
S6JB0A5211001
I5JB0A520017-02

Advertisement

Table of Contents
loading

Table of Contents