Table of Contents
Advertisement
1D-154 Engine Mechanical: For F9Q Engine
Installation
CAUTION
!
Before starting engine (including when performing oil level check and air bleeding process of cooling
system) for the first time after installing turbocharger, be sure to lubricate turbocharger, referring to
"CAUTION" in "Installation" under "Turbocharger Assembly Removal and Installation". Otherwise,
lack of lubrication will cause turbocharger damage.
1) Connect transmission to engine referring to "Manual Transmission Assembly Dismounting and Remounting: For
Diesel Engine Model in Section 5B", if removed.
2) Lift engine with transmission and front suspension frame to engine compartment using engine jack.
CAUTION
!
Before lifting engine, in order to avoid damage to A/C compressor, make clearance by rising them.
3) Tighten engine rear mounting member bolt referring to "Engine Mounting Components: For F9Q Engine".
4) Carry out Step 5) through 19) of "Installation" under "Front Suspension Frame, Stabilizer Bar and/or Bushings
Removal and Installation in Section 2B" in order to install engine with front suspension frame.
5) Remove engine jack.
6) Install relay box (1), fuse box No.1 (2) and boost pressure control solenoid valve (3) to vehicle body.
2
1
3
I5JB0B140044-01
Advertisement
Chapters
Table of Contents
