Toshiba STRATA DK24 Manual page 566

MESSAGE ADMINISTRATION FUNCTIONS
(continued)
LCD NAME/NUMBER DISPLAY
(continued)
4) Press the m (or m) button.
l
The MSG LED lights steadily.
l
The LCD displays, MSG.
5) Press the m (or m 11 m) button.
l
The MSG LED goes out.
l
The message is now stored.
TO CLEAR NAME/NUMBER DISPLAY
Press the m button, dial 1 [I and press the m button.
l
Listen for confirmation tone, then busy tone.
During clear:
I.,,,
LCD NAME/NUMBER DISPLAY
This feature allows you to store a title (such as your name,
telephone number, location, etc.) in system memory. This title (i.e.,
LOBBY) will display on your station's LCD while it is idle, and it will
appear at other stations' LCDs when they are called from your
station. Name display information for non-LCD telephones or voice
mail/auto attendant devices may be stored from station 200. When
NAME/NUMBER is recorded for non-LCD telephones or other
devices, their NAME/NUMBER is displayed on LCD telephones
when called.
After clear:
piziziq
NOTES:
1. Your title will appear on the LCD during direct intercom,
forwarded, and hunted calls. On override or OCA calls,
the LCD will not display the title.
2. After a name is cleared, it may be redisplayed at anytime
by dialing m 1 B 0.
3. A name is displaced by message and call forward settings
if they are set.
TO ENTER NAME/NUMBER INFORMATION FROM YOUR
STATION
4. To erase NAME/NUMBER information from memory,
repeat steps 1 - 3 above and enter blanks in step 2.
Blanks are entered by pressing 0 in the alpha mode.
1)
2)
3)
Press the m button and dial 111.
l
USER NAME? will appear on the upper line of the LCD.
l
Current information will appear on'the lower line of the
LCD.
p!iiEcq
Enterthe new information viathe dialpad (referto Record LCD
Messages for method).
l
Up to 16 characters can be recorded.
Press the B button.
l
The new information is stored.
TO ENTER NAME/NUMBER INFORMATION FOR ANOTHER
STATION OR VOICE MAIL DEVICE FROM STATION 200
1) Press the m button and dial 110.
l
USER NAME? will appear on the upper line of the LCD.
l
Current information for station 200 will appear on the
lower line of the LCD.
piiiEzq
2) Press them button.
l
The LCD displays, DEST. EKT NO.?
3) Dial the intercom number (111) of the NAME/NUMBER
information to be recorded.
l
The LCD displays, DEST EKT NO. NNN.
!2
23