Toshiba STRATA DK24 Manual page 558

SUMMARY OF LCD FUNCTIONS
(continued) SUMMARY OF LCD FUNCTIONS
(continued)
I
DR. JONES OFFICE
I
K)
CO Line Number
1) Incoming Call
characters. The name will be displayed
on outgoing and incoming calls.
Incoming CO call-If your station is pro-
grammed for incoming ringing on that
CO line.
Transferred CO call-CO line is trans-
ferred to your station in the ringing state
by another station.
Camped-on CO call-CO line was
camped-on to your busy station and rings
your station when you hang up.
2) When Call Is Answered
3) Hold
p!isEcq
4) Hold Recall
pizE!q
5) Outgoing
The display changes to indicate calling
status.
You have put a CO line call on hold at
your station.
Held call automatically recalls your sta-
tion after a programmed period of time.
When you manually select a CO line, it is
displayed. Thisdisplay is replaced by the
dialed number as you dial.
6) CO Line Queuing (Callback)
When the CO line queuing feature rings
back to your station with an available CO
line, that line number will be displayed.
Date/Time
Dialed Number
1) CO Line
(
2) Intercom
I
Idle Telephone
NOTES:
I. Press them button to display
date/time when talking on a CO
line.
2. The date/time is adjusted on a
system-wide basis by the station
located in port 00 (usually station
200).
The digits are displayed as you dial over
either a CO line or the intercom using:
l
Manual dialing
l
Automatic dialing
l
Repeat last number dialed
l
Saved number redial
NOTE:
lfyou are calling on a CO line, the display
will automatically change from dialed
number to elapsed time after a pro-
grammed period of time.
Door Phone/Monitor
When you are called from a door phone,
m.
Its designating characters are displayed.
I.,
When you call a door phone, its desig-
nating characters are displayed.
NOTE:
The doorphone designators are NA, Nl3,
and/or NC (N = 1 w 4, and indicates which
7