Toshiba STRATA DK24 Manual page 348

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
PROGRAM 92
INITIALIZING SPEED DIAL NUMBERS, ID CODES CHARACTER MESSAGE MEMORY, TIMED
. REMINDERS, DIGITAL TELEPHONE VOLUME, AND CALL FORWARD BACKUP RAM
more data
/
Enter programming mode
Clears Station Speed Dial, Voice Mail ID Codes,
and LCD memos assigned to Station Speed Dial numbers.
Clears System Speed Dial and LCD memos assigned to
System Speed Dial numbers.
Clears Character Message Memory (Station and System)
and user Name/Number display.
Clears Timed Reminders.
Resets digital telephone volume levels to initialized settings. This sets
Infercorn Tone/BGM, busy overrride (muted ring), and speaker/ringing
volume to approximately mid-range on all DKTs (Release 3). 4
q
Clears Call Forward Memory
(all stations,
Release
2 and above).
NOTES:
1. IMPORTANT: It is mandatory to complete all parts of
Program 92
at every
new system install. If
Program
92 is not completed certain feature operations
may cause erratic system behavior.
2.
Use the instructions in Table 7-D (Section 200-096-301) to clear this data.
3. Program
92-9 does not affect fixed call forward settings.
4. Program 92-5 does not affect digital telephone handset
receiver volume
levels. To set off-hook handset receiver volume levels individually for each
digital telephone,
see Program 30, LEDs
12 and 13.
5. Power "OFF" and "ON" is required to clear telephone LCD Call Forward
Displays and Call Forward button LEDs. Call Forward memory is c/eared
when
Program
92-4 is run, even if system power is not cycled.
.
WARNING!
Running this program will erase customer data. I
2-48