Toshiba STRATA DK24 Manual page 368

I
PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM29-3
DIGITALDSSANDDSSCONSOLEKEYASSIGNMENTS
CONSOLE3
SELECT = 2
DSS Number l-4:
Each system can have up to 4
No. 01 - No. 20
dial, CO line access, or DSS
consoles. Enter the console to which
Press the LED/key that
is in the same position
station access code to the
keys are being assigned (DSS console 2).
as the console key being
key chosen. See code
DSS Key Group l-3:
assigned. The LED
table below for the keys
Each console has three groups lights and the LCD
to enter. See Notes 4 and 5.
of 20 LEDs/keys. Choose
displays the console
the group to be assigned. key's number.
Console 3
Code Table
Key Type
Code
Station Speed Dial
*10 -*49
System Speed Dial *60 - *99
CO Line Access
01 - 36
DSS (Station Access) #00 - #95
AC
89
NT1
91
NT2 92
Group No. 3
Key/Code Key/Code
10 20
09 19
08 18
07 17
06 16
05
15
04
14
03
13
02 12
01 11
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data associates the PEKU or PDKU's console with the telephone
connected to PEKU or PDKU's firstport. See Program 28 to reassign consoles
to other telephones.
3. When assigning CO line access keys (01 - 36), the associated telephone must
be assigned access to the CO line also. See Program 40.
4. Them andm keys may be changed tom, (9 arm keys, but they may not
be reassigned to other key locations.
5. Initialized data assigns
q
(Code 89) to Group No. 3 key 19 and
q
(Code 91)
to Group No. 3 key 20 on all consoles. All other keys are initialized as DSS keys
to ports 00 - 57, in sequential order.
6. Initialized key assignments are shown after Pro ram 29.
7. Important: Onlyprogramm,
q
, m,
q
, andh buttons;programming other
feature buttons on a console may cause system operation problems.
/ '
2-68