Toshiba STRATA DK24 Manual page 490

FEATURE USE
FEATURE USE
DO NOT DISTURB (continued)
AUTOMATIC CALLBACK (INTERCOM) (continued)
TO RELEASE THE DO NOT DISTURB MODE
Press the m button.
l
DND LED goes off.
NOTES:
1. Do Not Disturb prevents Off-hook Call Announce.
2. Outside calls will mute ring your station while in the
DND mode.
AUTOMATIC CALLBACK (INTERCOM)
After reaching a busy or DND station on an intercom call, you
may use Automatic Callback.
TO USE AUTOMATIC CALLBACK
1) Press them button (or dial 0) to set Automatic Callback.
l
Busy tone stops.
l
You will hear dial tone for two seconds and then busy
tone again.
2) Go on-hook. You may make other calls while waiting for the
called station to become available.
3) When the called station becomes idle:
l
Your telephone rings at a fast rate.
4) Answer the call within nine seconds to prevent the callback
from being cancelled.
l
You hear a single tone, as if making a regular intercom
call.
5) Proceed to voice announcement.
6) Proceed with the conversation.
NOTES:
1. You may cancel the re uest anytime prior to the
callback by pressing the '
button and-dial 1 m.
lb : button (or press the m
2. If, after answering a callback, you hear a busy tone, it
means the called party has already received or origi-
nated another call. Your request is not cancelled. You
will be called again the next time the station is idle.
CO LINE QUEUING
Provides a means for station users to be placed in a waiting
queue for a busy outgoing CO line group, and to be called back
when a CO line in the group is available.
TO USE CO LINE QUEUING
1) If all outgoin lines are busy,
dil ii
ou will hear busy tone.
2) Press the A : button (or dial 1) to set Automatic Callback.
l
Busy tone stops. You will hear dial tone for two
seconds and then busy tone again.
l
You may go on-hook or make other calls while waiting
for a trunk to become available.'
3) When a CO line becomes idle:
l
Your telephone rings at a fast rate.
l
CO LED flashes at the Incoming Call rate.
4) Lit? the handset within six seconds to prevent the callback
from being cancelled.
l
You hear CO dial tone.3
l
CO LED flashes at the In-use rate.
5) Dial the desired telephone number.2
6) Hang up when the call is completed.
NOTES:
1. You may cancel the request at any time prior to the
actual callback by
11 (or press the A
ressing them button and dialing
I$ : button).
2. If the original call was made using LCR (dial @, the
telephone number is automatically dialed in step 4.
3. If, after answering a callback, you hear a busy tone, it
means the trunk has already been seized or received
an incoming call. Yourrequest is not cancelled. You will
be called again the next time a trunk becomes idle.
ACCOUNT CODE CALLS e
On some calls, you may be required (forced) to dial an account
code before dialing an outside number. On other calls, you may
32
33