Toshiba STRATA DK24 Manual page 485

FEATURE USE
CALL TRANSFER WITH CAMP-ON (continued) CALL TRANSFER WITH CAMP-ON (continued)
l
CO LED illuminates steadily when the called station
connects with the transferred call.
l
If the station fails to answer the call, you will receive a
recall ring after a predetermined time.
. . . or. . .
3B) If the called station is busy:
l
Busy tone is heard.
4B) Hang up.
l
INT LED goes off.
l
CO LED changes to On-hold flash rate.
l
CO line is camped-on to the called station.'
l
Called station hears a warning tone.
l
CO LED illuminates steadily when the station con-
nects with the transferred call.2
NOTES:
1. You may reconnect to a transferred line (anytime
before it is answered) by pressing the appropriatem
button or dialm 0 B if them line does not appear on
your telephone.
2. The call will recall you and camp-on is cancelled if the
station does not pick it up within a predetermined time.
Inform the caller of the situation, and repeat the proce-
dure (if necessary).
TO ANSWER A TRANSFERRED CALL (if your station is idle)
1) Voice Signaling:
a) You will hear a single long tone, followed by an
' announcement.
l
INT LED flashes at the Incoming Call rate.
b) Acknowledge the announcement.
c) When the transferring station hangs up, you will hear
a ringing tone.
l
CO LED changes to the Incoming Call flash rate.
d) Press the appropriate [9 button.
l
CO LED changes to the In-use flash rate.
NOTE:
If your electronic telephone has the Ringing Line Prefer-
ence feature, you may press the m button or lift the
handset instead of pressing the
q
button.
2) Tone Signaling:
a) You will hear intercom ringing.
l
INT LED flashes at the Incoming Call rate.
b) Lift the handset (or press the m button).
l
INT LED changes to the In-use flash rate.
c) Speak to the transferring station.
d) You will be connected to the outside call when the
transferring station hangs up.
l
INT LED goes off.
l
The LED of the transferred CO line changes to
the In-use flash rate.
TO ANSWER A TRANSFERRED CALL (if your station is
busy)
1) You will hear a l-second warning tone.
l
The outside call is camped-on to your station.
l
CO LED flashes at the On-hold rate.
2) You have several choices:
a) Press the appropriate m button.
l
Existing call is terminated.
l
The new line is answered and its LED changes to
the In-use flash rate.
bl) Hang up.
. . . or. . .
l
Existing call is terminated.
l
The camped-on line rings at your station.
l
CO LED changes to the Incoming Call flash rate.
b2) Press them button (or lift the handset) to answer the
call.
l
CO LED changes to the In-use flash rate.
. . . or. . .
22
23