Toshiba STRATA DK24 Manual page 552

FEATURE USE
CENTREX APPLICATION
VOICE MAIL (VM)
(continued)
NOTE:
The above procedures are required for initial VM set-up
on/y. The digits remain in memory until changed.
Your system may be equipped with the Centrex Application,
which enhances the system feature capability when installed
behind a Centrex or PBX system.
Your digital telephone may be equipped with one or more of the
enhanced Centrex features listed below:
A) Flexible intercom Numbering (up to four digits)
A station intercom number can be three or four digits. It is,
therefore, possible to match a station's intercom and Cen-
trex line extension number. Dial the entire station number
when indicated.
NOTE:
To avoid system numbering plan conflicts, some access
code numbers may have to be changed.
B) Centrex Feature Buttons
Certain Centrex features may be operated by pressing a
button on your digital telephone. The Centrex access code,
including the necessary Flash and/or Pause sequence, is
activated when the appropriate button is pressed. Press the
appropriate Centrex feature button instead of dialing a
Centrex access code when operation of the feature is
desired. See your Centrex or PBX Operations Manual for
specific details.
C) Ringing Repeat
The distinctive ring patterns available in your Centrex sys-
tem are automatically repeated with your digital telephone,
allowing you to answer appropriately for either outside,
inside or callback calls.
D) Delayed Ringing
CO or Centrex line(s) may be programmed for a 12-second
and/or 24-second ring delay at stations to permit alternate
answering conditions. Answer the line when your digital
telephone is ringing.
54
._ :_,
55